FINISHING SERVICES
Frames
Frames are calculated based upon joined inches
(A+B=joined inches)
Back frames are wooden anti-warp
systems attached inboard and to the back of the mounting substrate.
They use a rabbeted, interlocking hanging method. Calculate
by using the size of the finished piece.
Metal
section frames
#58 profile
Nielson & Clark mouldings-Available in a wide range of
colors and metallic finishes. The basic frame for posters
and unmatted photos
#15 profile
Heavier version of #58 profile with same extensive color and
metallic selection. Better for large posters and matted photos
Secure
-T* Wall Mounting System
An anti-theft system for public installations, it will deter
casual theft and is ideal for offices, motels and restaurants.
The hardware installs to the wall and to the frame and is
secured with a wrench which must be purchased for installation
of this system.
Uniframes
Provides a clean un-bordered look. They are a clip system
that relies upon back pressure and are thus not recommended
for use with gatorfoam or foamcore unless supported by glass.
Mattes
Mattes can be custom cut to your image for use in frames.
Limited colors of crescent board are available.
Other
Presentation/Hanging Systems
Small Grommets
Large Grommets
Easels
Free
Hanging Systems
Use a plastic hanging system with a top and bottom section
only. Priced by the horizontal width of the graphics.
Standing
Displays
Standard chrome standing displays are an industry standard.
Heavy, tip resistant base and 22x28 top loading graphics.
Other sizes available.
VelcroŽ
Velcro hook fabric tape is typically applied to the perimeter
of the back of the print or board for use on a velcro loop
covered display wall. Can be applied as a continuous strip
for greatest adhesion, or as discontinuous strips for use
when the display is to be rolled for shipment. Not recommended
for use in permanent displays. Black or white available in
several widths.
Specialty
Finishing Services
Cut-outs are contour cut-outs, used primarily for stand-ups
in a POP or display applications. Substantial discounts can
be realized on quantities that can be set up for machine cut-outs
or die-cuts.
Radius corners give a rounded edge to the corners of the mounted
print.
Custom
Fabrication
Custom displays and cutouts on acrylic and other materials
available. For pricing and information, see your E2G Service
Representative.
|
